User guide

76
Troubleshooting
There is a hiss when starting DTS
LaserDiscs or CDs
The DTS audio stream is indistinguishable from a PCM
audio stream; the G65 takes 30ms to identify the
encoding, during which a hiss is heard.
With non-video DTS sources you can add a 30ms
delay to avoid this.
With video sources you can create a DTS-only
source to avoid any hiss.
For more information about each of these options see
Installing the Meridian Configuration Application , page
53.
The preset changes unexpectedly with
a multichannel source
If you are using a non-Meridian source on the MHR
SmartLink input, proprietary data may cause preset
switching.
Select Force this source to be six-channel for
the source. See Installing the Meridian Configuration
Application , page 53.
•
•
•