User guide

60
Configuring the G65
Digital Surround
Controller
Speaker size
These tests allow you to determine the bass handling
capability of subwoofers and large analogue speakers.
Once set, the digital surround controller will limit the
bass level to protect the speakers from potential
damage.
On starting the test the speaker sizes are set to zero to
avoid the possibility of damaging the speakers, and the
display shows:
ìî ïñ öõú óòô
Press More for help
Sizes set to zero
The display then shows the first large analogue
speaker; for example:
ìî ïñ öõú óòô
Press More for help
Left Size 0
Press A or V to adjust the size value for the speaker
until it just begins to distort distinctly, and then reduce
the value by one.
Press > or < to move between each of the speakers
to be adjusted.
This is the last test in the calibration procedure; see To
complete the calibration procedure , page 57.
•
•