User guide

57
Configuring the G65
Digital Surround
Controller
To start the calibration procedure
Either:
Press Next on the last option of configuring settings;
see To calibrate the system , page 51.
Or:
Press On/Off to put the digital surround controller
into standby.
Press More.
If the product is locked the display shows:
5NLOCK6ERSION
Press Unlock.
The display shows:
,OCK#ALIB6ERSION )2 7IZARD
Press Calib.
The displays shows Please wait….
After a few seconds the display shows the first
calibration test:
Left Level +0.0dB
ìî ïñ öõú óòô
Press More for help
For more detailed information about this and the other
calibration tests see the following sections.
•
•
•
•
•
To exit from the calibration procedure
You can exit from the calibration procedure at any time,
and any parameters you have set will be retained:
Press On/Off.
To complete the calibration procedure
When you reach the end of the calibration procedure
the following display confirms that you have completed
the calibration of the system:
Back Next Restart
Calibration complete.
Press Restart to restart the calibration procedure, or
Next to complete the wizard.
The display shows:
RestartBack Exit
Press More for help
Wizard complete
Either:
Press Exit to return to standby.
Or:
Press Restart to return to stage 1; see Stage 1:
Resetting the product , page 45.
•
•
•
•