User guide

51
Configuring the G65
Digital Surround
Controller
Stage 4: Configuring other settings
The next stage allows you to configure other aspects of
the product’s operation.
To configure other settings
Either:
Press Next after configuring the sources; see
Configuring sources , page 49.
Or:
Press Wizard; see To run the Configuration Wizard ,
page 44.
Press Skip to skip past the stages 1 to 3.
The display shows the title screen for stage 4:
3KIP"ACK %NTER
/THERSETTINGS
0RESS-OREFORHELP
Press Enter to proceed or Skip to go to the
calibration procedure.
The first setting is displayed:
z{|wxy"ACK .EXT
4HEFANIS

USEDASNECESSARY
A description of each setting is shown on the top line
of the display, and its current value is shown to the
right of the display.
The settings are summarised in the table on the next
page.
To change a setting
Press A or V to step through the alternative values
for the setting.
•
•
•
•
•
To calibrate the system
When you have finished configuring the settings:
Press Next to proceed to calibrating the system, as
described in the next chapter.
Alternatively, to return to standby:
Press On/Off.
•
•