User guide

49
Configuring the G65
Digital Surround
Controller
The digital surround controller provides up to 12
sources corresponding to the 12 source keys on the
MSR+:
CD, RADIO, DVD, AUX, DISC, TAPE, TV, CABLE,
SAT, VCR1, VCR2, GAME.
For each source the Configure sources stage allows
you to configure a series of options, including:
Whether it is in use.
The label used for it on the front-panel display.
The audio input it selects.
The Trigger output level it selects.
The procedure for doing this is as follows.
To configure a source
Either:
Press Next after configuring speakers; see
Configuring speakers , page 47.
Or:
Press Wizard; see To run the Configuration Wizard ,
page 44.
Press Skip to skip past the Reset settings and
Select speakers menus.
The display shows the title screen for stage 3:
3KIP"ACK
0RESS-OREFORHELP
%NTER
#ONFIGURESOURCES
Press Enter to proceed or Skip to go to stage 4.
The display shows the first source and the first
configuration option for that source, whether it is in
use:
z{|wxy"ACK .EXT
4HISSOURCEIS
3OURCE
#$ INUSE
Press Next or Back to step between options.
•
•
•
•
•
•
•
•
•
The top line of the display shows a description of each
option, and its current value is shown to the right of the
source name.
When changing the source name, Next and Back
step between character positions.
The options are summarised in the table on the next
page.
To change an option
Press A or V to step through the alternative values
for the option.
To move to the next source
Press Source.
When you have finished configuring sources:
Either:
Press Next on the last option of the last source
(Game) to proceed to configuring settings, as
described in the next section.
Or:
Press On/Off to return to standby.
•
•
•
•
Stage 3: Configuring sources