User guide

45
Configuring the G65
Digital Surround
Controller
Stage 1: Resetting the product
The digital surround controller provides several
alternative standard settings, called Types, which
configure all aspects of the product into the most
commonly needed configurations.
Choosing one of the Types overrides any other
configuration you may have performed, and so can be
used to reset the configuration of the unit.
To reset the configuration
Press Wizard.
The display shows the title screen for stage 1:
%NTER 3KIP"ACK
0RESS-OREFORHELP
2ESETSETTINGS
Press Enter to proceed or Skip to go stage 2.
If you pressed Enter the display shows:
"ACK 9ES 
2ESETALLSETTINGS
Press Yes to proceed or Back to exit.
The display shows the current Type:
"ACK .EXT z{|wxy
!LL!N-ONO4(83UB
4YPE
Press A or V to step through the available Types.
A description of the speakers for each type is shown
on the top line of the display. As you select each Type
the digital surround controller is reset to that Type.
•
•
•
•
When you have selected the Type you want:
Either:
Press Next to proceed to configuring speakers, as
described in the next section.
Or:
Press On/Off to return to standby.
•
•