User guide
26
Customising the
G65 Digital Surround
Controller
Defining your own presets
The G65 Digital Surround Controller allows you to
modify any of the built-in presets, and save them for
future use.
You can either save the changes to the built-in preset,
or you can create up to 10 presets of your own, with
names of your choice, so you can use them alongside
the built-in presets.
To save the preset settings
Make sure the menus are unlocked; see
To unlock
the menus
, page 16.
Press DSP (front panel or remote) to select the
preset you want to modify.
Change the preset parameters to the values you want
to store; see
To change a DSP parameter
, page 18.
Press More until you see Store:
#$4RIFIELD
#LEAR3TORE"RIGHT
Press Store.
The display shows the next available user-defined
preset.
For example:
3TORE wxy z{|
0ICK0RESET
TOOVERWRITE
5SER
If you want to overwrite an existing user-defined
preset press A to select the preset you want to
overwrite.
For example:
3TORE wxy z{|
0ICK0RESET
TOOVERWRITE
#LASSICAL
•
•
•
•
•
•
Alternatively press V to choose the built-in preset you
started with. For example:
3TORE wxy z{|
0ICK0RESET
TOOVERWRITE
4RIFIELD
Press Store (remote or under the front panel).
The settings have been stored in the new or existing
preset you selected.
If you are defining a user preset you can now edit the
name of the preset if you wish.
A flashing cursor shows the letter you are editing:
st uv wxy 3TOREz{|
7RITE,ABEL
FOR0RESET
_SER
Press > or < to select the character position you
want to edit.
Press A or V to change the character.
Each press steps through the sequence A to Z, a to z,
0 to 9, full stop, and blank. You can also select a blank
directly by pressing Clear on the remote.
For example, you could change the name to:
st uv wxy 3TOREz{|
7RITE,ABEL
FOR0RESET
,A3CALA
When you have entered the name you want to use
press Store.
The display shows:
3TORED
st uv wxy !SSIGNz{|
To make the new preset the default for the current
source and audio format:
Press Assign.
•
•
•
•
•
•