User guide
25
Customising the
G65 Digital Surround
Controller
Changing the DSP preset for a source
Each source has an appropriate DSP preset associated
with it for each music format. For example, for a
standard stereo (PCM) signal the CD source uses
Trifield and the TV source uses TV Logic.
This section explains how to change the DSP preset
associated with any source.
To assign a DSP preset to a source
Make sure the menus are unlocked; see
To unlock
the menus
, page 16.
Select the source you want to change by pressing
the Source key on the front panel or the appropriate
source button on the remote, eg CD.
If necessary, select a signal in the appropriate format.
For example, to change the DSP preset used for
DTS compact discs, play a DTS CD.
The display will show the source and the DSP preset
currently assigned to that source.
For example:
#$4RIFIELD
2ADIO 46 $306#2$6$
Press DSP until the display shows the new DSP
preset you want to assign. For example:
#$-USIC,OGIC
2ADIO 46 $306#2$6$
Press More until you see Assign.
Press Assign to save the new assignment.
The display shows, for example:
#$-USIC,OGIC
st uv wxy !SSIGNz{|
•
•
•
•
•
•