User guide

13
Using the G65
Digital Surround
Controller
Changing the display
The G65 Digital Surround Controller displays
information about the current settings on the front-
panel display.
You can adjust the brightness of the front-panel display
for optimum viewing, and choose what information is
displayed.
The digital surround controller automatically stores
these settings, even with the power off.
To change the brightness
Either:
Press More until the display shows the brightness
keys:
$6$#INEMA
#LEAR3TORE"RIGHT
Press Bright+ or Bright- to change the brightness.
The display shows the current brightness setting:
$6$"RIGHT
#LEAR3TORE"RIGHT
Or:
Hold down Function and press > or < on the
remote until the display shows the current brightness
setting.
For example:
$6$"RIGHT
2ADIO 46 $306#2$6$
Hold down Function and press A or V on the
remote to change the brightness setting.
You can change the brightness between 1 and 16.
•
•
•
•
To change the displayed information
Press Display (front panel or remote).
For example:
$6$#INEMA
2ADIO 46 $306#2$6$
Each time you press Display the display will step
between the options shown in the following table.
Display option Example
Source, DSP
preset, and volume.
$6$#INEMA
2ADIO 46 $306#2$6$
Source, DSP preset,
and THX reference
level.
$6$#INEMA
2ADIO 46 $306#2$6$
Audio format, no. of
channels, content
type, & sample rate.
$6$0#--USICK
2ADIO 46 $306#2$6$
Blank.
If the Diagnostic display option has been selected,
additional diagnostic displays are included; refer to
the Meridian Web site at www.meridian-audio.com for
details.
•