Specifications

I n s t a l l i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
9
With HDCP encrypted sources, it can take up to 15 seconds for the HDCP authorisation
between source and display to be acquired. The display device must be HDCP compatible to
get an image.
The
SETUP menu offers selections for setting the output type. See Configuring the digital
video processor
, page 17 for details.
To connect a high scan rate analogue display
• Connect the R, G, B, H-sync, and V-sync component video outputs from the DVP1080HD
to the RGBHV (5-wire) input of the analogue display.
Alternatively connect the Y, Pr, and Pb outputs from the DVP1080HD to the YPrPb (3-wire)
inputs of an analogue display.
RGBHV is highly recommended over YPrPB. Use only high-quality 75
Ω cables. RGBHV must
use five wires. Be careful not to swap the H and V cables.