User guide

14
Setting up
the DSP8000
loudspeakers
To connect to a Meridian product with BNC Comms
BNC COMMS
Front R – Slave Front L – Master
RJ45 lead
Digital/BNC lead
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
DIGITAL OUTPUT
G Series CD Player or Control Unit
If the Meridian source or control unit provides a
Meridian BNC Comms output, you will need to connect
it to the DSP loudspeakers using a Digital/BNC lead.
Connect the DIGITAL OUTPUT and the BNC
COMMS socket from the Meridian source or control
unit to the DIGITAL INPUT and COMMS INPUT on
the DSP8000 chosen as the Master, using a
Digital/BNC lead.
•
Connect the MERIDIAN SPEAKERLINK OUTPUT
from the Master DSP8000 to the SpeakerLink input
on the other (Slave) DSP8000, using a SpeakerLink
lead.
Configure the Master DSP8000 as M.Coax and the
Slave DSP8000 as S.RJ45; see To choose Master
or Slave and the primary connector , page 24.
•
•