User guide

Configuring the digital surround controller using a computer
91
To configure the source options
● Select the source in the list of sources.
● Click the Options tab.
● Select Source exists if you want to use this source.
This section describes how to use the Meridian Configuration
program to configure the sources provided by the digital
surround controller.
To set up sources
● Click the Sources icon in the left-hand panel of the Meridian
window.
The right-hand panel shows a list of the 12 sources that are
available. For each source you can display three pages of
settings by clicking on the Options, Connections, or Advanced
tabs.
Setting up sources