User guide

Configuring the digital surround controller using a computer
87
As you change the options the layout illustration will change to
show the resulting layout.
If you select a combination of options that is not supported, the
other options will be adjusted accordingly to ensure that the
whole configuration is valid.
For example, if you specify two sides and two rears, and then
select two subwoofers, the side speakers will be removed to
enable you to have the subwoofers.
To specify the size and type of the
main speakers
● Choose Large if your main left and right speakers are large,
with good bass performance, and you want to use them for
full range reproduction.
● Choose Small if your main left and right speakers do not have
a good bass response and you want to use one or more
subwoofers to handle the bass for the system.
● Choose analogue or DSP according to the type of each
speaker.
The following table gives recommended settings for Meridian
loudspeakers:
Loudspeaker Recommended setting
DSP5000, DSP5500, Large DSP
DSP6000, or DSP6000C
DSP5000C Small DSP
M60 Large analogue
M60C, M33, or A500 Small analogue