User guide

54
Setting up the digital surround controller
Audio tape and expansion socket
outputs
The following table gives details of the tape and headphone
outputs:
Use this output To connect to this
DIGITAL Tape Out A digital tape recorder.
Tape L, R An analogue tape recorder or video
recorder.
Room 2 L, R A second tape recorder or a Meridian
preamplifier in a second room.
Expansion socket * Additional expansion output.
* The function of the expansion socket depends on the
expansion card fitted. The optional Tape card provides a
headphone output.
Control outputs
The following table gives details of the control outputs:
Use this output To connect to this
TRIGGER OUT 1 Other equipment. On when the 561 is
switched on but not in standby.
TRIGGER OUT 2 A TV SCART input or motorised
screen. On for S-video sources.
The trigger outputs provide 100mA at 9V. They can be
configured to other settings; see Configuring the digital surround
controller without a computer, page 65.