User guide

Defining your own presets
34
The 561 Digital Surround Controller allows you to modify one of
the built-in presets, and save it for future use.
You can either save the changes to the built-in preset, or you
can create up to 12 presets of your own, with names of your
choice, so you can use them alongside the built-in presets.
To save the preset settings
● Make sure the menus are unlocked; see To unlock the menus,
page 24.
● If necessary, select a signal in the appropriate format. For
example, to change the DSP preset used for DTS compact
discs, play a DTS CD.
● Press Preset (front panel or remote) to select the DSP preset
you want to modify and then associate with the source.
For example:
Trifield
● Change the preset parameters to the values you want to
store; see To change a DSP parameter, page 25.
● Press Store (remote).
The display shows the next available user-defined preset.
For example:
Sto.User 2
● If you want to overwrite an existing user-defined preset press
A or V to select the preset you want to overwrite.
For example:
Sto.User 1
Alternatively if you started with a built-in preset you can choose
that and overwrite it.
For example:
Sto.Trifield
● Press Store (remote).
The settings have been stored in the new or existing preset you
selected.
If you are defining a user preset you can now edit the name of
the preset if you wish.
Defining your own presets