User guide

94
Configuring the digital surround controller using a computer
● If you have two Meridian source units of the same type you
can configure them to have different Comms addresses. You
can then select the appropriate source by specifying its
Comms address in the Comms address field.
● You can also select a 30 millisecond delay to avoid DTS
noise. This option should not be selected for video sources as
it will prevent the sound from being in sync with the picture.
● Select Only ever play DTS for this source to create a video
DTS source that will avoid any DTS noise when switching
audio formats.
● Select either of Triggers 1 or 2 to activate the specified
trigger outputs when this source is selected.
To set the advanced source options
● Click the Advanced tab to show the Advanced page of
settings.
● If the source is connected to another Meridian unit, set
Comms type to 1C for a Meridian CD player, 2C for a
Meridian FM tuner, and 3C for a Meridian DVD player.
Otherwise set it to none.