User guide
Table Of Contents
- Contents
- Index
- A
- B
- C
- D
- G
- L
- M
- P
- R
- S
- safety warnings
- sample configurations
- selecting a source
- service
- settings, storing
- Setup mode, selecting
- setup options, configuring
- slave, selecting
- sources
- speaker position, specifying
- specification
- standard settings, selecting
- standby, switching to
- status indicators
- storing settings
- switching to standby
- T
- U
- V
30
CONFIGURING THE
DSP8000
LOUDSPEAKERS
The options are summarised in the table below:
Option Initial value Alternatives Explanation
Label
Radio
CD, Radio, LP, The label used to identify the
etc. source on the front-panel display.
Audio input
D1
D1 or D2. Choose D1 or D2 to specify the
input.
Comms type
2C
1C – 9C, or NC. Choose 1C for a Meridian CD
player, 2C for a Meridian FM
Tuner, 3C for a Meridian DVD
player, or NC otherwise.
Address
1A
1A – 8A. Allows you to have up to eight
of each source type.
FIFO
FF. Y
Y or N. Choose N to disable the FIFO
buffer if you have difficulty
locking to a poor source.