User guide

10
DSP5200 and
DSP5200HC
Specifications
Connections
Meridian SpeakerLink (RJ45) input and output,
providing balanced digital audio, Meridian Comms,
and serial interface.
Digital co-axial input and output.
Meridian BNC Comms input and output.
Signal processing
1 x Freescale 56367 running at 150MHz.
Special Edition: 2 x Freescale 56367 running at
150MHz.
2 x 24-bit Multi-bit delta-sigma DACs with 128x
oversampling.
Crossover minimum-phase at 2.6kHz.
Output stages
Power amplifiers: Complementary bipolar design, with
output-stage error correction and twin loop design.
Bass: 2 x 75W.
Treble: 75W.
Acoustic
2  way.
Ported bass enclosure.
Isolated mid enclosure.
Bass drive unit: 2 x 160mm (6") custom
polypropylene driver.
Treble drive unit: 1 x 25mm (1") Meridian piston in
short horn, aluminium dome with silver voice-coil.
Special Edition treble drive unit: 1 x 25mm (1")
Meridian piston in short horn, beryllium dome with
silver voice-coil.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Characteristics
Distortion: typically <0.02% up to full power.
Noise and hum: <-94dBr at all volume settings.
Acoustic output: typically >108dB spl @ 1m.
Acoustic noise: <15dB spl @ 1m.
Frequency response: in room response within 3dB,
35Hz–20kHz.
Special Edition frequency response: in room response
within 3dB, 35Hz–32kHz.
Cabinet
Entire speaker manufactured from interlaminated
panels.
Individually covered grilles for bass units.
Finished in high-gloss piano lacquer.
8-character display with system lights.
DSP5200: 300mm x 903mm x 356mm (11.8" x
35.6" x 14.0") (W x H x D).
DSP5200HC: 735mm x 201mm x 267mm (29.0" x
7.9" x 10.5") (W x H x D).
35kg (77lb) each.
Power
100-125; 200-250V AC 50-60Hz.
20VA standby; 600VA max.
Meridian Audio reserves the right to amend product
specifications at any time.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•