User guide

DSP520/640 User Guide
8 EN
EN
To use DSP520/640 loudspeakers in a
Meridian Digital Theatre
DSP520/640 loudspeakers are ideal as the front, rear, and
centre loudspeakers in a Meridian Digital Theatre, in conjunction
with a Meridian Digital Surround Controller such as the G68.
The following diagram shows how to connect the loudspeakers
using “home run” wiring.
Connect the L+R SpeakerLink output on the lower row of
the G68 to the Master digital loudspeaker (here the front left
loudspeaker), using an RJ45 cable.
•
Connect the appropriate SpeakerLink outputs on the G68 to
each of the remaining loudspeakers, using RJ45 cables.
Make sure the Channel selector on each DSP520/640 is set
to the Left, Right, or Centre position as appropriate.
Alternatively you can connect the loudspeakers using “daisy
chain” wiring: connect the front and rear L loudspeakers to
the G68, and then link each pair of loudspeakers together by
connecting the output from the L loudspeaker to the input of
the R loudspeaker.
•
•
Meridian Surround Controller
Centre – Slave
Front L – Master
Front R – Slave
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
RJ45 cableRJ45 cableRJ45 cable
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
DSP520 – Rear L
DSP520 – Rear R
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
RJ45 cable
RJ45 cable
MERIDIAN
SPEAKERLINK