User guide

EN
DSP520/640 User Guide
5
EN
To fit the loudspeaker
Clamping
screws
(M5 x 10)
Grab handle
Using the grab handle, sit the loudspeaker on the lower edge
of the wall box.
Plug in the RJ45 cable(s) and AC supply.
With the aid of the grab handle, slide the loudspeaker into
position, inserting the top of the loudspeaker into the wall box
first.
Fix with M5 x 10 button-head screws (DSP520 8 pieces,
DSP640 12 pieces).
Remove the grab handle to fit the last pair of screws. This is
no longer required.
•
•
•
•
•
To fit the scrim and grille
Scrim
Grille
Magnet
positions
Lay the scrim into the back of the grille.
Carefully hold the grille with your fingers at the top, also
holding the scrim in place.
Locate the lower edge of the grille at the bottom edge of the
mounting frame for alignment.
Lay the grille gently down onto the magnets, which will hold it
in place.
•
•
•
•