User guide

EN
DSP3200 User Guide
5
EN
To use a pair of DSP3200s in a Meridian
Digital Theatre
DSP3200s are ideal as the rear loudspeakers in a Meridian
Digital Theatre, in conjunction with a Meridian Digital Surround
Controller such as the G68. The following diagram shows how
to connect the speakers using “home run” wiring.
Connect the L+R SpeakerLink output on the lower row of
the G68 to the Master digital speaker (here the front left
speaker), using a Meridian SpeakerLink lead.
•
Connect the appropriate SpeakerLink outputs on the G68 to
each of the remaining speakers, using Meridian SpeakerLink
leads.
Make sure the Channel selector on each DSP3200 is set to
the L/C position on the back of the left speaker and to the R
position on the back of the right speaker.
Alternatively you can connect the speakers using “daisy chain”
wiring: connect the front and rear L speakers to the G68, and
then link each pair of speakers together by connecting the
output from the L speaker to the input of the R speaker.
•
•
Meridian Surround Controller
Centre – Slave
Front L – Master
Front R – Slave
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink leadSpeakerLink leadSpeakerLink lead
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
DSP3200 – Rear L
DSP3200 – Rear R
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
MERIDIAN
SPEAKERLINK