User guide

EN
DSP3200 User Guide
3
EN
Unpacking
The DSP3200 is supplied with the following accessories:
Power cord.
This manual.
•
•
If either of these items are missing please contact your dealer.
NOTE: You should retain the packaging in case you need to
transport the units.
Connections
The following diagram gives details of the connections on
the base of the speaker:
L/C R
Input
Output
SpeakerLink
Digital Channel
Selector
Power
Inlet
Fuse
220-240V ~50-60 Hz 200W max
Channel
selector
SpeakerLink
input output
Power
Digital connections
Use this connection To connect to this
SpeakerLink input The SpeakerLink output of a Meridian
Sooloos component, Digital Surround
Controller, or Audio Core 200.
SpeakerLink output The Speakerlink input of a second
DSP3200 digital speaker, when daisy-
chaining the speakers.
Miscellaneous
Switch Description
Digital Channel Selector Set to L/C to use the speaker as a left
or centre channel speaker. Set to R
to use the speaker as a right channel
speaker.
Standby indicator
The status of the DSP3200 is shown by a green standby
indicator on the back panel.
Status Description
Dimly illuminated Speaker in standby
Brightly illuminated Speaker operating
The speakers are switched on or into standby as appropriate via
the SpeakerLink connections by the Meridian system they are
connected to.