Specifications

7
Accessories
Each unit is shipped complete with cables
to enable it to be used in a Meridian Digital
Music System.
Other applications, and some advanced
features, may require one or more of the
following accessories, which can be purchased
from your Meridian dealer:
• Additional S5 leads (8m and 14m).
• 511slavepatchboxifconnectingmorethan
two DSP loudspeakers to a Digital Surround
Controller.
INSTALLATION AND SETUP
Unpacking
• Inspectproductboxandunitforanyshipping
damage.
• Saveproductboxintheeventtheunitneedsto
be shipped in the future. Shipping the unit in a
genericboxmayvoidwarranty.
Mounting
The C52 is primarily designed to be mounted
in a standard 19in rack. However, screw-on
optional feet are provided for free-standing
operation. The feet should be removed if the
unit is to be rack-mounted.
• EXCESSIVEHEATMAYCAUSETHEUNITTO
MALFUNCTION OR SHORTEN PRODUCT LIFE.
Follow regular installation rules for proper
ventilation.
• Besureracklocationhasadequateventilation.
Allow a minimum of 1U rack space (1.75in)
above and below unit for ventilation.
• Allowadditionalventilationwhenmounted
near other power amplifiers or other equipment
thatmaygenerateexcessiveheat.
Connections
Be sure to use high quality cables for both
sources and output signals.
AC Power Connector
Connect to a stable AC power line. Ensure
that the unit is connected to a supply of the
voltage specified on the unit and that the unit
is of the correct type for the territory in which
it is being installed.
• Toavoidgroundloops,apowerconditionerfor
the equipment rack is recommended.
• Staticelectricitycancauseequipmentproblems.
Be sure installer is grounded to chassis or
equipment rack before connecting sources.