User guide

Configuring the digital surround processor without a computer
70
The digital surround processor provides 12 sources
corresponding to the 12 source selection keys on the Meridian
System Remote.
When the digital surround processor is reset to one of the
standard Types the sources are set up with the labels, inputs,
and presets shown in the table below.
Standard source settings
Source Audio 2-channel Digital DTS MPEG
input preset preset preset preset
CD CD/D1 Trifield Digital DTS Mus MPEG Mus
Radio RADIO/A2 Music Digital DTS Mus MPEG Mus
LP RADIO/A2 Music Digital DTS MPEG
TV TV/A1 TV Logic Digital DTS MPEG
Tape 1 RADIO/A2 Music Digital DTS MPEG
Tape 2 TAPE2/D4 Music Digital DTS MPEG
CDR CDR/D3 Trifield Digital DTS MPEG
Cable TAPE2/D4 TV Logic Digital DTS MPEG
DVD * DVD/D2 Trifield Digital DTS MPEG
VCR 1 TV/A1 Pro Logic Digital DTS MPEG
VCR 2 RADIO/A2 Pro Logic Digital DTS MPEG
LD LD/01 THX Cinema Digital THX DTS THX MPEG THX
* If a multi-channel card is present, the DVD source is chosen as the advanced source with the following settings; see MHR Smart link,
page 2:
Source Audio Music2 Movie2 Music6 Movie6
input preset preset preset preset
DVD M1 Trifield PLIIMovie Discrete Cinema