User guide

DSP presets

Mono

In the Mono DSP preset you can choose to listen to:

❍ Only one of two input channels, for use when different

languages or material are carried on each channel.

❍ A combined version of the two input channels, for use if the

material was originally mono and has been conveyed on a

two-channel carrier.

If Party? is set to No, the combined or selected signal is played

only through the centre speaker, or the left and right speakers if

there is no centre, to centrally localise high-frequency hiss and

clicks.

Note: If Party? is set to Yes, full range bass is played through any

speakers that are not supplemented by a subwoofer, and this may

damage small speakers at high volume levels.

Mono DSP preset parameters

Parameter Options What it changes

Input Auto L+R, The channel selected.

Input L, Input R,

Input L+R

Academy Off or On Select On to include an

equalisation (recommended by

Lucasfilm Ltd) to correct for a

high-frequency balance in

some old mono films. Ignored if

Party? is set to Yes.

Party? No or Yes Select Yes to play the mono

signal through all speakers,

including subs.