User guide

Defining your own presets
30
Changing the integration of the centre
To change the relative delay of the
centre speaker
● Press > or < (remote) until the display shows the current
centre depth.
For example:
Depth +0.0
● Press A or V (remote) to change the relative depth of the
centre speaker.
You can change the depth between -2.5ms, which corresponds
to moving the centre speaker 0.75m (2  feet) nearer to the
listening position, and +5ms, which corresponds to moving it
1.5m (5 feet) further away from the listening position.
Increasing the depth makes the sound more open. Decreasing it
makes the sound more focused.
If you have a centre loudspeaker you can adjust its relative
loudness, to provide the best integration of the centre with the
main left and right speakers.
You can also adjust the relative delay of the centre speaker to
give the best perspective between the three front speakers.
Note: These adjustments are not available for the Direct, Stereo,
or Mono presets.
To change the relative level of the
centre speaker
● Press > or < (remote) until the display shows the current
centre level.
For example:
Centre+0.0dB
● Press A or V (remote) to change the relative level of the
centre speaker.
You can change the relative level by ±3dB in 0.5dB steps.