User guide

Using the digital surround processor
22
Changing the display
The digital surround processor displays information about the
current settings on the 12-character front panel display. In
addition, it can display the same information superimposed on a
video image. For more information about setting up the
on-screen display refer to Connecting video, page 59.
To change the display
● Press Display.
Each press will step between the following options:
Display option Example
DSP preset and volume
Music 65
DSP preset and THX gain
Music -22
Source and volume
Radio 65
Audio stream, number of channels,
and sampling rate.
PCM 6-ch 44k
Blank
The audio stream display option shows the following three
pieces of information about the audio stream:
AC3 5.1 44k
Sample rate:
96k 96kHz
88k 88kHz
48k 48kHz
44k 44kHz
NL Not locked
Format:
PCM 2-channel PCM
AC3 Dolby Digital
DTS DTS encoding
MPG MPEG encoding
MLP MLP encoding
MHR MHR encoding
Input channels:
X.X Main.LFE
2-ch 2-chan. discrete
6-ch 6-chan. discrete
In addition, the following symbols on the front panel display
indicate which of the DSP processing modes are operating:
Symbol What it means
Dolby processing is operating, or the
source material is Dolby Digital.
THX processing is operating.
Source material is DTS.
MPEG Source material is MPEG.