User guide

Configuring the digital surround processor using a computer

● If the source is connected to another Meridian unit, set

Comms type to 1C for a Meridian CD player, 2C for a

Meridian FM tuner, and 3C for a Meridian DVD player.

Otherwise set it to none.

● If you have two Meridian source units of the same type you

can configure them to have different Comms addresses. You

can then select the appropriate source by specifying its

Comms address in the Comms address field.

The following additional options are available. You should only

change these with advice from your dealer:

Option Description

Delay for audio sources to Avoids the noise caused by

avoid DTS noise (DTS delay) switching to a DTS audio

source.

Only ever play DTS for this Creates a video DTS source

source (two-channel that will avoid any DTS noise

sources only) when switching audio formats.

Force this source to be Select this to avoid automatic

six-channel (multi-channel preset switching if you are

sources only) using a non-Meridian source

on the MHR Smart Link input.

Option Description

Number of video frames of Adds a delay required by

delay to apply to audio certain video systems.

Poor digital audio source – Select this if you have difficulty

frequency out of range locking to the source.

Source uses validity flag May reduce switching noise

properly on certain sources where this

is a problem.