Specifications

14-58 Software installation
Performing a software installation
Standard 1.0 System Installation and Modification Guide January 1998
Continuing the
software installation
To continue the software installation, reenter information, or to
abort the installation, follow these steps.
Step Action
1 Select Done, then press <Return>.
Result:
The following prompt is displayed:
All required information has been input.
Do you wish to continue, re-enter
information, or abort? Continue
2 Do you wish to continue, re-enter information, or abort?
If Continue, go to steps 3, 4, and 5.
If Re-enter, go to step 6.
If Abort, go to step 7.
3 Select Continue, then press <Return>.
Note:
If you selected “From Another Tape” for languages (see
“Selecting languages” on page 14-17), you are prompted to
remove the current tape and insert the other tape.
Result:
Whether you are required to use another tape or,
“languages” does not appear because you did not require
another tape, the system runs various routines:
When these routines are completed, the following message is
displayed:
The operation successfully completed.
Remove the tape when it finishes rewinding
and boot into Service.
Shutting down tape server
#TAPE:MMTAPE1>