Specifications

Change system serial number 12-9
Changing the system serial number
Standard 1.0 System Installation and Modification Guide January 1998
4 Enter the change serial number keycode that Nortel supplied to
you.
Example: Your display will be similar to the following screen.
5 Continue?
If Yes, go to steps 6 and 7.
If No, go to step 8.
6 Select Yes, then press <Return>.
Result:
The following message is displayed:
The serial number has been changed.
7 Remove the Install/data tape and turn the power off. After 10
seconds turn the power on.
Note:
Booting the system takes from 10 to 15 minutes per
node. After booting, the Meridian Mail logon screen appears.
Step Action
ATTENTION
Store the Install/data tape in a safe place. This will
ensure that if you need to reinstall or modify the system,
you will have quick access to the tape.