Specifications

11-8 Recreate system
Recreating a system
Standard 1.0 System Installation and Modification Guide January 1998
Recreating a system
To upgrade your system to the latest MM12 release, follow
these steps.
Starting Point: The System Operation Utility Menu
Step Action
1 Press the up or down arrow keys until the number
corresponding to Recreate a System is displayed on the screen
(or enter the desired selection number), then press <Return>.
Result:
The following prompt is displayed:
You have chosen to upgrade to the latest
MM12 software
Do you wish to continue? Yes (No)
2 Do you wish to continue?
If Yes, go to step 3.
If No, select No, then press <Return> to return to the System
Installation and Modification Menu.
3 Select Yes, then press <Return>.
Result:
Various system messages are displayed. Examples of
some of the messages displayed are:
Checking System version
Writing Operating System to Prime Node
Disk
IPL successfully written to disk
Creating required volumes
Adjusting volume sizes
Removing obsolete files