Specifications

3-70 Comprehensive upgrade
System recovery from shadow disk
Standard 1.0 System Installation and Modification Guide January 1998
10 Move the cursor using the up and down arrow keys to N3 and
press <Return>.
11 At the prompt, type in the following:
Load #tape:mmtape1:software:spm.mirror_pkg
and press <Return>.
12 To start synchronizing the disks, type the following at the
prompt:
Fenable 1
and press <Return>.
13 When prompted for the buffer size, press <Return> to accept
the default size (64 K).
Buffer size (k) :64
14 Repeat steps 9 through 13 for each remaining odd voice node
(SPN) in the range N5 . . . N9, and for each paired node
(N3,N4.... N5, N6 ... N7, N8 ... N9, N10) where you have
enabled double disk packs.
Note:
Wait until all nodes have generated the following SEER
indicating that the disks are synced:
INF 6601 ADMIN
15 Remove your Install/data tape and reboot to full service.
Step Action
ATTENTION
Store the Install/data tape in a safe place. This will
ensure that if you need to reinstall or modify the system,
you will have quick access to the tape.