Specifications

Comprehensive upgrade 3-31
Performing a comprehensive upgrade
Standard 1.0 System Installation and Modification Guide January 1998
Example: The example below is for a Mod Op GP system.
Requirement: For Mod Op GP: Login Code, Logout Code, and
NRDD Code should be changed to blank unless otherwise
specified by the system administrator. For Login and Logout
Code, see also the
MSMTranslations Guide
(NTP 557-7001-310). For the MSM, blank out the Login and
Logout Codes if the channel is connecting to a PBX.
For the DSP Telescan Ring value:
6 Select Done, and press <Return>.
7 Use the following table to locate your next procedure.
Step Action
ATTENTION
The DSP Telescan Ring parameters should be compatible
with the switch type. Do not change the default values
unless informed by Nortel. In those cases, the
administrator may change the DSP Telescan Ring
parameters to match the type of switch.
IF your platform is the THEN go to
Modular Option GP page 3-42.
MSM page 3-45.