Specifications

3-30 Comprehensive upgrade
Performing a comprehensive upgrade
Standard 1.0 System Installation and Modification Guide January 1998
3 Select operation.
If Done, go to “Defining voice port hardware locations for
Modular Option GP” on page 3-42, or “Defining T1 hardware
locations for the MSM” on page 3-45.
If Change, go to step 4.
4 Select Change, then press <Return>.
Result:
The following prompt is displayed.
Enter the Link ID:
Note:
If the system has or requires more than 1 SMDI Link, you
must enter the unique SMDI Link ID.
5 Enter your link number, then press <Return>.
Result:
Other prompts are displayed as you enter values and
press <Return> until the following screen is displayed.
Note:
Select your switch type using the up and down arrow
keys, then press <Return>.
Note:
The software scans through all the T1 channels with the
selected Link ID and updates the T1 channels to the new Link
ID, Login Code, Logout Code, etc.
Step Action
ATTENTION
It is recommended that you use a meaningful name
instead of a number, so that the link is easily identified.