Specifications

Comprehensive upgrade 3-23
Performing a comprehensive upgrade
Standard 1.0 System Installation and Modification Guide January 1998
Entering DSP
parameters
To review or change the DSP parameters on your system,
follow these steps.
Step Action
1 From the previous procedure, press <Return>.
Result:
The following DSP parameters screen is displayed.
Requirement: You have four selections at the “Select
operations” prompt which are revealed each time you press the
up or down arrow keys. Select
• “Done” if you are satisfied with the default values or after
you have completed all the parameter changes.
• “Change” if any of the parameters require changing. You
will be stepped through each parameter.
• “Redraw” if your screen becomes overwritten with errant
characters and you need to clear them from your DSP
screen.
• “Reset” if you decide to go back to the default settings after
you have changed them.
2 At the “Select operation: “ prompt,
if Done, go to step 9.
If Change, go to step 3.