Specifications

3-20 Comprehensive upgrade
Performing a comprehensive upgrade
Standard 1.0 System Installation and Modification Guide January 1998
7 A Modular Option EC system prompts:
Your system requires “n” J4/J5 loops.
Please make sure you define enough loop(s)
for your system.
An Option EC-11 system prompts:
Your system requires “n” NLI loops.
Please make sure you define enough loop(s)
for your system.
Note:
The following examples show displays for the Mod Op
EC MMP40 and the Option EC-11 respectively. Also, in the
examples below, “255” is a special number only to be
employed if the loop is unused. For the Mod Op EC MMP40
example enter: 12, 13, 14, and 15. For the Option EC-11
example enter: 20, 24, 28, and 255.
Example: The screen immediately below shows a Mod Op EC
MMP40 system with 2 utility cards installed in the number 6
card slot of nodes 1 and 5 respectively. In this case, four loop
numbers are required.
Step Action