- Excel / Meridian Data Computer Drive User Manual

SECURSTOR ASTRA ES 107
Drive Status Indicators
There are two LEDs on each Drive Carrier. They report the presence of power and a disk drive, and the current
condition of the drive.
The Astra ES spins up the disk drives sequentially in order to equalize power draw during start-up. After a few
moments the Power/Activity and Disk Status LEDs should display green.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber
Red
Power/Activi
ty
No Drive
Drive
Present
Activity
Status
No
Power/No
Drive
Drive OK
Drive
Rebuilding
Drive
Error
(Drive Status Indicators)
Back of Enclosure
When the FRU Status LED on Astra ES front panel shows Amber or Red, check the LEDs on the back of Astra
ES. These LEDs give the status of the field replaceable units.
Under normal conditions, the power supply and fan LEDs should display green.
LEDs
State
Dark
Green
Amber
Red
Power supply
Not detected
OK
Fan failed
Failed
Fan
Not detected
OK
Wrong speed
Failed
(Back of Enclosure)
To check a component’s installation, follow the same procedure as replacing the component, except that you
reinstall the original component rather than a new one. In most cases, this action fixes a bad connection and
allows Astra ES to detect the component. If this action does not correct the problem, replace the unit.
The Controller Location LEDs, on the back of the Astra ES subsystem, will flash for one minute.