- Meridian Controlled Routing Installation And Upgrade Guide

64 Chapter 4: Meridian Link/CCR hardware
553-3202-210 Standard October 1998
¥ RESET switch This switch invokes a cold restart. The system
performs a self-test and then reboots. Do not press the switch while
applications are running. Exit all applications and prepare the system
for powering down before pressing the RESET switch. If the SBC card
is the system controller, this switch also generates a VME bus system
reset. The software power-down procedure is provided in Chapter 14,
ÒSoftware installation, upgrade, and update procedures.Ó
!
CAUTION
Risk of data loss
Do not press both the ABORT and the RESET switches at
the same timeÑyou risk losing device configuration
information.