- Meridian Controlled Routing Installation And Upgrade Guide

514 Chapter 16: Additional application configuration
553-3202-210 Standard October 1998
Procedure 23: Configuring printer ports (continued)
Figure 284
Port state prompt
Available states:
off (printer) on (terminal)
Select a state (default: ÒoffÓ):
5 You are prompted to select a state (ÒoffÓ selects a printer; ÒonÓ
selects a terminal). To configure the port as a printer, type off and
press [Return].
Figure 285
Baud rate prompt
Available BAUD Rates:
1200 2400 9600
Select a BAUD rate (default: 9600):
6 You are prompted to select a baud rate. Press [Return] to leave the
baud rate unchanged.
Figure 286
Port configuration confirmation
STATE = off
BAUD = 9600
Do you want to install these new characteristics (y/n)?
7 You are prompted on whether you want to install these new
characteristics. Type y and press [Return] to indicate that you wish
to apply your changes.
The portconfig command executes and you return to the Òmaint>Ó
prompt.
8 At the Òmaint>Ó prompt, type printconfig and press [Return].
The printer configuration menu appears.