- Meridian Controlled Routing Installation And Upgrade Guide

498 Chapter 15: Link configuration
553-3202-210 Standard October 1998
Procedure 15: Changing Meridian Mail Link (link 2) parameters
(continued)
7 To save your changes, go to the appropriate procedure:
¥ Procedure 16: Replacing the default configuration file
¥ Procedure 17: Creating a configuration file
Table 144
Link parametersÑLink 2
Link parameter Allowed values
(defaults in parentheses)
Description
Protocol* ASYNC Link protocol used
Link type* 3 Type of link (1 = AML link, 2 = host link,
3 = Meridian Mail Link)
Machine ID Meridian Mail Logical name assigned to the Meridian
Mail system
Delay 0 Maximum time (in seconds) between
packet transmissions
Port number tty03 The port used for Meridian Mail Link
Note: Parameters marked with an asterisk (*) cannot be changed.