- Meridian Controlled Routing Installation And Upgrade Guide

474 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 9: Restore configuration files and data files from the backup
tape (continued)
Figure 255
Rstdata messages screen 3
Starting restore
x 4k of 6k [1] usr/maint/files/AMprofile
x 4k of 10k [1] /usr/maint/files/AutoStart
x 4k of 14k [1] /usr/maint/files/IncrDY
x 4k of 18k [1] /usr/maint/files/IncrTM
x 4k of 22k [1] /usr/maint/files/Port
x 4k of 26k [1] /usr/maint/files/Prefs
x 4k of 30k [1] /usr/maint/files/Speed
x 4k of 34k [1] /usr/maint/conf/hdlchlnk.dataf
x 4k of 38k [1] /usr/maint/conf/hdlcmlnk.dataf
x 4k of 42k [1] /usr/maint/conf/lh.config
x 4k of 46k [1] /usr/mlusr/conf/loop13DCE.d
x 4k of 50k [1] /usr/mlusr/conf/loop13DTE.d
x 4k of 54k [1] /usr/mlusr/conf/loop31DCE.d
x 4k of 58k [1] /usr/mlusr/conf/loop31DTE.d
x 4k of 62k [1] /usr/mlusr/conf/tscfg.datafile
x 4k of 66k [1] /usr/mlusr/conf/vlink.datafile
x 6k of 72k [1] /usr/mlusr/conf/x25bcf333.2
x 4k of 76k [1] /usr/mlusr/conf/x25hlink.datafi
Restore successful
Configuration changed, restarting link processes.
Configure Link 0 : successful
Configure Link 1 : successful
Configure Link 2 : successful
Enable Link 0 : successful
Enable Link 1 : successful
Enable Link 2 : successful
Link 0 : enabled but down
Link 1 : enabled but down
Link 2 : enabled but down
Link 0 : up
Link 1 : up
Link 2 : up
Application release successful
9 If, in step 6, you stopped any applications, you are prompted to
restart them. Type y and press [Return] to restart the applications.
10 Unlock the tape drive and remove the cassette tape. Keep this and
label it with the date, and store it with all your backup tapes in a safe
place in case you need to use it again.
11 Perform Procedure 10: Verify the installation.