- Meridian Controlled Routing Installation And Upgrade Guide

458 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 8: Load the application software from tape
Before loading the application tape (labelled Tape 2 of 2), ensure that you
reboot and go through setup as described in Procedure 7. This procedure
assumes you are at the ÒConsole Login:Ó prompt. If you have just performed
Procedure 7, you may see the Ò#Ó prompt; if so, skip steps 1 and 2 and go to
step 3.
!
WARNING
If you plan to use Ethernet, ensure that your module is
connected to a working Ethernet backbone.
1 At the ÒConsole Login:Ó prompt, type root and press [Return] to log
in as the root user.
2 At the ÒPasswordÓ prompt, press [Return].
3 At the root shell prompt Ò#,Ó type sysadm and press [Return].
Figure 225
System administration menu
SYSTEM ADMINISTRATION
1 diagnostics system diagnostics menu
2 diskmgmt disk management menu
3 filemgmt file management menu
4 machinemgmt machine management menu
5 packagemgmt package management menu
6 softwaremgmt software management menu
7 syssetup system setup menu
8 ttymgmt tty management menu
9 usermgmt user management menu
Enter a number, a name, the initial part of a name, or
? or <number>? for HELP, q to QUIT:
4 At the system administration menu, type 6 and press [Return].