- Meridian Controlled Routing Installation And Upgrade Guide

342 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
Table 127
LD 11ÑDefine multi-line telephones as AST
Prompt Response Comment
REQ NEW Add new telephones
TYPE aaa Enter the telephone type as
appropriate
TN l s c u Terminal number
CDEN SD, (DD), 4D Card density
CUST 0Ð99 Customer number
KLS 1Ð7 Number of key/lamp strips attached
¥
¥
Press [Return] until the AST prompt
appears
AST 00 DN key with AST telephone
assignment (host controllable; up to
two DN keys can be assigned as
AST). This example shows that key
0 is an AST DN.
IAPG (0)Ð15* AML link status message group,
defined in LD 15. Since Group 0
sends no messages, the default
value is not normally used. Group 1
(all messages) or a customer-
designated group (2Ð15) would
normally be used here.
¥
¥
¥
Press [Return] until the KEY prompt
appears
*Groups 10 through 15 are only available in X11 Release 17 or later
software.
ÑcontinuedÑ