- Meridian Controlled Routing Installation And Upgrade Guide

310 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
Table 109
LD 17ÑConfigure ESDI or MSDL port (Options 21Ð81) (continued)
Prompt Response Comment
ABOR* 1Ð(5)Ð255 Number of aborts before an out-of-
service threshold
ADAN <cr> Go to next prompt or exit overlay
VAS NEW Add a value added server
VSID 0Ð15 VAS (host computer) identifier
AML 0Ð15 AML associated with this VAS ID.
This number should match the AML
port entered at the first ADAN
prompt.
SECU YES Security for AML. Must be set to
Yes.
INTL 4 Time interval, in five-second
increments
MCNT 400 Message count threshold for number
of messages per time interval (from
INTL)
CONF DIR Direct link for this AML configuration
AML 0Ð15 Enter another AML port if user wants
more than one AML associated with
this VASID; usually not more than
one AML is associated with one
VASID
VSID <cr>
CSQI (20)Ð255 Maximum call registers for AML
input queues
* Unless there are exceptional reasons to use other values, use the
default values for the four out-of-service parameters: RXMT 5,
CRC 10, ORUR 5, and ABOR 5.
ÐcontinuedÐ