- Meridian Controlled Routing Installation And Upgrade Guide

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 307
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Table 108
LD 17ÑConfigure ESDI or MSDL port (Option 11) (continued)
Prompt Response Comment
AML 0Ð15 AML associated with this VAS ID. This
number should match the AML port
entered at the ADAN.
SECU YES Security for AML. Must be set to Yes.
INTL <cr>
MCNT <cr>
CONF DIR Direct link for this AML configuration
AML <cr> If another AML port is not required,
press [Return].
Enter another AML port if you want
more than one AML associated with this
VASID; usually not more than one AML
is associated with one VASID.
VSID <cr> VAS (host computer) identifier
VAS <cr> Add a value added server
ATRN <cr>
ALARM <cr>
¥
¥
¥
Press [Return] until the REQ prompt
appears
REQ CHG, END Either change more data or exit the
overlay, saving changes to the
configuration record
Ñ end Ñ