FEATURES DESCRIPTION MODELS / EXTRAS 1 M-10 MVP-600 Hydraulic Calibration Hand Pump Pneumatic Calibration Combination Hand Pump Range: 0-10,000 PSI (700 Bar) Compatible with most hydraulic fluids, oils, H2O Connections: 1/4” NPT/BSP 2 Year Quibble-Free Warranty Weight: 3 lbs Range: Vacuum 28"Hg to Pressure 600 PSI (40 Bar) Compatible with all gauges and calibrators Connections: 1/4” and 1/8” NPT/BSP 2 Year Quibble-Free Warranty Weight: 2 lbs Utilizes a fully adjustable stroke control for quick primi
Pressure • Vacuum Calibration Pump Range: Near absolute vacuum (30”Hg to 80 PSI) Resolution - 0.0001 PSI Bench Mountable 2 Year Quibble-Free Warranty Weight: 3.5 lbs Range: 0 PSI to 100 PSI (7 Bar) | 28"Hg to 0 PSI Compatible with all gauges and calibrators Connections: 1/8” NPT/BSP 2 Year Quibble-Free Warranty Weight: 1 lb Capable of extremely high resolution (0.0001 psi) as it spans the range of near absolute vacuum to low pressures (30" Hg to 80 psi).
PATENT PENDING PP-4 Magnum Pro Pneumatic Power Pump Magnum Pro DESCRIPTION PATENT PENDING • 0 to 4,000 PSI • Light weight • Easy to set up • No heavy nitrogen bottles necessary • No contamination of process system with oils and water • Won’t freeze in low temp from water intrusion • Can operate with a remote control (manifold) • Can be used on a bench or taken out to the field • 2 Year “Quibble-Free” warranty Pneumatic Power Pump FEATURES Fluids in a transmitter or delicate system have always been a
Regular & High Pressure Calibration Hoses All fittings are rated to 5,000 psi (some 10,000 psi) Fast Connection: Twist hand tight, no tools, no tape Eliminate thread damage to instruments Minimize contamination to process media All fittings are made of stainless steel Custom sizes by request 10,000 psi working pressure 32,000 psi burst pressure Pneumatic & hydraulic applications Small in diameter (3/16" OD) High Pressure Hose made of Kevlar & Steel Any length & any fitting configuration In calibration, t
MODEL 1 MODEL 2 Auto Ranging Digital Gauge™ Wide Range Digital Gauge FEATURES Accuracy: 0.1% of reading from absolute zero to 3,000 psi Units: psi, Bar, psia, inches of H2O, inHg, mmHg, Absolute Temperature Compensation: 0-50°C (32-120°F) Connections: 1/4” NPT Male 2 Year Quibble-Free Warranty Weight: 2 lbs Accuracy: 0.
4” Analog Gauge 2.5” Analog Gauge Accuracy: 0.5% Accuracy full Scale (ANSI Grade 2A) All Stainless Steel with Rubber Boot Liquid Fillable Connections: 1/4” NPT Male 2 Year Quibble-Free Warranty Weight: 1 lb Accuracy: 0.5% Accuracy full Scale (ANSI Grade 2A) All Stainless Steel with Rubber Boot Liquid Fillable Connections: 1/4” NPT Male 2 Year Quibble-Free Warranty Weight: Under 1 lb The M-4 analog gauge comes in a variety of display sizes and ranges to suit your exact needs.
HART Communicator Smart Manometer FEATURES Reads manufacturers DDs in their native format Enhanced 4.3” diagonal anti-glare touchscreen Ergonomic, handheld design Operating temp: 14 to 122°F (-10 to 50°C) 480 X 272 pixels display Full QWERTY keyboard Handheld, high-precision, digital manometer with an accuracy of up to ±0.
™ Wet/Wet Smart Manometer Enhanced Rotary Gas Meter Tester Accuracy: up to ±0.
FEATURES DESCRIPTION MODELS / EXTRAS 9 ThermCal400 SOURCE 3000 Dry Block Temperature Calibrator Pressure Source Range: 25°C - 400°C (20°C ambient) Stability: ±0.02°C (25°C - 200°C) | ±0.04°C (200°C - 400°C) Accuracy: ±0.25°C (25°C - 200°C) | ±0.4°C (200°C - 400°C) Heat up time 25 to 400°C: 13 Minutes Cooling time 400 to 100°C: 20 Minutes Weight: 11 lbs Self-contained nitrogen cylinder "Overpressure Protection" regulator Works with all pressure calibrator models 15.
™ Meteo Station Differential Calibrator Barometric pressure, Dew point determination Altitude Measurement Second temperature with insertion sensor Works with Leica precision measurement equipment Peak Value Storage, min/max Ranges from as low as 0-10" H2O Data Log Memory for 10,000 measurements MIN/MAX and average values Accuracy to better than .
™ DESCRIPTION PIE 850 10-50 mA Multifunction Process Calibrator The PIECAL 830 is more than a multifunction calibrator that can handle Milliamp, Voltage, Frequency, pH Ohms, Thermocouples, RTDs, Pressure, Loop Diagnostics, and Transmitter Supply. It is also a loop detective that is able to diagnose common problems that other test equipment just cannot find. Calibrate with Confidence Detect hidden loop problems Accurate to ±0.02% of Reading + 0.01% Full Scale.
™ PIE 334+ Multifunction Process Calibrator Milliamp Loop Diagnostic Calibrator The PIECAL 820 process calibrator packs the power of six single function calibrators into one surprisingly small package. It combines advanced features, ease of use, accuracy, signal compatibility and compact size. Essentially functions as a Fluke™ 743 without pressure and documentation functions. The PIECAL 334+ powers up the 2-Wire transmitter or loop and indicates the total current and the uncontrolled current.
™ DESCRIPTION FEATURES PIE 434 PIE 311 Automated Diagnostic 4-20 mA Calibrator Automated Universal RTD Calibrator The PIECAL 434 allows you to check, calibrate and measure all of your current signal instruments in a 4-20 mA DC loop. It can be used at any access point in your loop. You can calibrate recorders, digital indicators, stroke valves or any instruments that get their input from a 4-20 mA loop. Quickly diagnose ground fault and current leakage.
™ PIE 422 Automated Thermocouple Calibrator - J, K, T & E Automated Thermocouple Calibrator - 14 Types The PIECAL 322-1 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the PIECAL 322 and get a thermocouple calibrator with a backlit display, a rubber boot and rugged switches with the same high accuracy.
™ DESCRIPTION PIE 541 PIE 511B Frequency Calibrator with Totalizer Ten Type RTD Plus Ω Simulator The PIECAL 541 is the best tool for calibration, test, and any frequency devices in the shop, plant and/or field. Save hours of time on problems when compared to other calibration methods. This calibrator will automatically stop when the selected number of pulses has been sent to the totalizer, eliminating the need of a stop watch.
Portable 24V Loop Power Supply Portable 24V Loop Power Supply No need to run wires Can Power Any 4-20mA Loop Up to a month of daily use Battery Operated 2 Year Quibble-Free Warranty No need to run wires Can Power Any 4-20mA Loop Up to a month of daily use Battery Operated 2 Year Quibble-Free Warranty The Loopy 5000 provides field technicians with a portable, economic, and durable 24VDC power source for powering field transmitters.
DESCRIPTION PD6000 Trident X2 Process & Temperature Meter ProVu® Process Meter Input: Process: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V) Temperature: Thermocouple J, K, T, E; RTD 100 Ω Pt Display: 4-digit, 1.20" (30.5 mm) Case: 1/8DIN, NEMA 4X/IP65 Power: 85-265 VAC or 12-36 VDC option Operating Temperature: 0 to 65°C Input: 0-20 mA, 4-20 mA; 010 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave) Display: Dual-line 6-digit, 0.60" (15 mm) & 0.
ProVu® Temperature Meter ProtEX-RTP Pulse Input Flow Rate/Totalizer Input: Thermocouple J, K, T, E, R, S, B, N , C; RTD 100 Ω PT, 10 Ω Cu, 120 Ω Ni, 1,000 Ω Pt; Modbus PV (slave) Display: Dual-line 6-digit: 0.60" (15 mm) & 0.
DESCRIPTION 1051 1040 8 Decade Wide Range Resistance Box 8 Decade Wide Range Resistance Box A precision low ohm resistance box designed for general laboratory work including platinum resistance thermometry. The 1051 is compact and durable, with range from 0.01Ω to 1MΩ and 0.1% best accuracy. A popular wide range decade box covering 0 to 100MΩ in 1Ω steps, with 0.1% best accuracy. The 1040 is used in both industry and education, providing precision and reliability in all required applications.
6 Decade Precision Resistance Box Decade Capacitance Boxes A high accuracy resistance decade box ideal for PT100 simulation applications. Range is 0 to 12kΩ in 10mΩ steps, with ± 0.01% accuracy. Capacitance boxes suitable for applications in industry and education. The 1070 is a 5 decade model for 100pF to 100μF and the 1071 has 7 decades for 10pF to 100μF. Range / Resolution: 0 to 12kΩ / 10mΩ steps Accuracy: ± 0.01% Resistance: Less than 10mΩ - Less than 1mΩ variation Power Rating: 0.
DESCRIPTION FEATURES 1006 | 1007 1024 DC Millivolt Sources DC Current Calibrator High accuracy handheld millivolt sources primarily used for voltage injection or potentiometric voltage measurement (1007). Applications include thermocouple simulation and calibration of A/D converters and chart recorders. A portable benchtop DC current source for calibration and test applications from nanoamp levels to 100mA.
Voltage/Current/Resistance Calibrator Voltage and Current Calibrator A portable multifunction calibrator with voltage, current, and resistance ranges. The 1017 is suitable for calibrating a wide range of instruments including thermocouples, transducers, transmitters, and platinum resistance thermometers. A precision handheld calibrator that can be used as a general purpose current and voltage source.
DESCRIPTION FEATURES MODELS / EXTRAS 23 1048 7006 Voltage and Current Calibrator Loop-Mate 1 Loop Simulator and Source A compact voltage, current, and process loop calibrator for engineering, manufacturing, test, and process control applications. The 1048 combines digital accuracy with simple analogue control and is well suited to plant operations such as powering control loops. A cost-effective handheld loop simulator that provides 4 to 20mA or 0 to 10V loop signals.
PT100 Simulator Multifunction Process Calibrator A handheld precision simulator for PT100 0.3850 platinum resistance elements used for accurate temperature measurement. High performance metal film resistors are used throughout which ensures a good temperature coefficient and long term stability. A portable, key-press operation instrument that combines source and measurement functions for thermocouples, RTDs, mV and mA. The 1090 features a memory storage function that holds frequently used values.
DESCRIPTION FEATURES MODELS / EXTRAS 25 5025E 5075 Multifunction Calibrator Precision Digital Multimeter A precision multi-product calibrator designed for wide calibration workload coverage at an affordable cost. Accurately test and verify both traditional and new test equipment with a calibrator that meets both technical and budget requirements. A benchtop digital multimeter that combines high performance with simple operation.
CalBench Multi-Purpose Calibration Benches Common applications include the calibration of: Pressure: Gauges, Calibrators, Transducers, Transmitters, Indicators, Switches, Valves. Temperature & Loop: Sensors, Indicators, Thermocouple and RTD Transmitters, Calibrators, PRTs, Thermistors. Electrical/Electronic: Multimeters, AC/DC Signal Sources, Clamp Meters, Tachometers, Ohmmeters, Decade Boxes. Frequency: Signal Generators, Oscilloscopes, Frequency Meters, Timer Counters.
