User manual

Introduction : Synchronizing VCube Essentials with Pyramix
Page 13
Synchronizing VCube Essentials with Pyramix
Currently, as of Pyramix v7.1 and VCube v3.1, synchronization of the two programs is achieved via Virtual Trans-
port. The following checklists will help you set up all three programs with adequate settings.
Pyramix Checklist for Synchronization
1. Launch Pyramix
2. Open the All Settings menu in Pyramix (Alt + G)
3. Open the Remote Control > Virtual Transport sub menu
4. Tick the Enable Virtual Transport Communication box
5. Tick the Automatically Set as Clock Master box
6. Tick the Automatically Set as Time Code Master box
7. Click OK to save settings and activate Virtual Transport
Pyramix Settings All Settings > Remote Control > Virtual Transport page