Installation guide

www.merging.com/VCube

Sync Board (optional)

The Sync Board hardware option enables RS-422, LTC, MIDI and optional Bi-Phase to control or to be controlled by VCube.

Note: Please see also the documentation accompanying the Sync Board before attempting installation.

The PCI(e) slot is only used to support the board mechanically. The connection to the mother board is via a USB link. USB 1.1 is sufcient

but a USB 2 socket can be used if available.

Inserting the Sync Board:

Make sure the computer is turned off (and unplugged) before installing the Sync Board.

To avoid the possibility of static electricity damage to the PC or the Sync Board please use an anti-static strap to

connect yourself to a known good earth.

Remove the computer covers required to gain access to the peripheral slots.

Indentify a vacant PCI(e) slot. Remove the slot / bracket for the chosen PCI(e) slot.

Insert the Sync Board into the PCI(e) slot.

•