User manual

Control Settings Page : View Tab
Page 89
User Workspaces
Workspace 1 to 10 Click on the G...buttons to Generate the respective Workspace. Or use [Ctrl + Key
Number]
Type a name for the Workspace and Click on OK to Generate.
Workspace 1 to 10 Click on the Lo... buttons to Load the respective Workspace. Or use [Shift + Key
Number]
Delete All Workspaces Deletes all the Workspaces loaded currently.
Reset VCube User Interface Resets the entire VCube User Interface to the factory defaults.
Default Workspaces
UIMode: Simple Click the button to change the UIMode to Simple
UIMode: Advanced Click the button to change the UIMode to Advanced
Protect If the User Interface is Unprotected clicking on the Protect button pops-up the Protect
dialog to enable a Password to be entered and Protection to be activated.
If the User Interface is already Protected attempting to change the User Interface mode
pops-up the Protect dialog to enable the Password to be entered to unprotect the UI.
Note: The Simple Mode password is different from the Composition protection password.
Generate Workspace dialog
Password Protect dialog Lock
Password Protect dialog Unlock