User manual

Recording and Acquisition : Recording
Page 56
Recording and Acquisition
Acquisition
In many applications recording will be unnecessary. In these cases Compositions can be created by importing
projects in formats such as AAF. Please see: Import on page 34.
Alternatively, empty Compositions can be created and Media Files imported using the Media File Browser.
Please see: Media Management on page 42.
Recording
Note: When Record : Enable is checked Quick SD Settings and Quick HD Settings are unavail-
able. Audio recording is only available with Audio or Video I/O card options.
The plug-in corresponding to the video card must be enabled and set up in User Interface > Settings Tabs >
Settings > Show Video I/O Tab [Shift + Alt + P]. Please see: Video I/O on page 101
Note: Be sure that both reference video input on the synchronization panel of the VCube and
the Video Card Reference Input are referenced to the same genlock, black and burst, or video sig-
nal. This is the only way to ensure precise timing of the video signal.
The Record Tab Page has two Tabs.
Record - Settings > Show Record Settings Tab includes Enable and Record Settings. [F12]
Record Log - Settings > Show Record Log shows information about each file recorded. [Ctrl + R]
Record Settings Tab
Enable When checked recording is possible using the settings in the rest of the Tab.
Note: The Enable button must be disabled (unchecked) in order to see captured Media in the
Timeline.
V1 Click on the V1 button to arm Video for recording. When lit (as above) Video is armed for
recording.
AES Mykerinos AES This section shows the Audio Hardware currently selected for recording. The number of
record channels available will vary accordingly to a maximum of 8.
Record Settings Tab page